主要参数编辑本段回目录
| Model: | EZ-2 |
| Released: | 1987 |
| Price: | US $??? |
| CPU: | NEC V40 @ 7.14MHz |
| RAM: | 512K, 640K max. |
| Display: | 80 X 25 text |
| 640 X 200 pixels graphics | |
| 14-inch monochrome monitor | |
| Ports: | Printer, mouse |
| system expansion bus | |
| Storage: | 3.5-inch 720K floppy drive(s) |
| optional 20Meg hard drive | |
| OS: | MS-DOS 3.21 |
详解编辑本段回目录
  |
Similar to the Commodore PET 2001 - the monitor is attached and cannot be removed, but it does rotate and swivel.
There are three models of the eazy PC:
An unusual MS-DOS home computer - very limited with no internal expansion capabilites, only a mouse (serial), printer, and 'option' connector on the back. The 'option' connection is for installation of additional memory, a modem or serial port.
Seen below is the EZ-3 motherboard, with the single floppy and 20Meg hard drive installed:
 | I was quite pleased to find this one but this was very short lived as it only powered up once for about 15 mins, then it froze, on reboot it didn't do anything. On dismantling I found that one proccesor was split and a couple of resistors in the power supply had been very hot. It didn't mater what I tried I couldn't get this one to power up again. This one came with some of the original Dos floppies |
 | This shows the two floppy disk drives |
 | This shows the memory epansion and com port box connected to the back. |
相关链接编辑本段回目录
参考文献编辑本段回目录
http://oldcomputers.net/zenith-eazy-pc.html
